Product Description

1.Galvanized Road Safety Construction Protection Portable Temporary Fencing Panels/Temporary Fence Panel for Australia and New Zealand

Temporary fence is made of welded wire mesh panel and square pipes. And there is a square pipe in the middle of welded wire mesh panel to support it and make it more strength. And it can be PVC coated, powder coated, galvanized or painted. Its permanent counterpart when a fence is required on a short-term of temporary fence panels to suit your site specific requirements. Our fence panels are designed and constructed to be the strongest and most durable in the industry. They can be installed quickly and easily, They can be free standing or anchored into any type of surface.

Galvanized Road Safety Construction Protection Portable Temporary Fencing Panels Spec
Specification of Temporary Fence

Wire Diameter 2.5mm, 3.0mm, 3.5mm, 3.8mm,4.0mm,5.0mm
Mesh Opening (mm) 50x100mm,50x150mm,75x100mm,75x150mm,etc
Panel Size (H*L) 1.8×2.1m,1.8×2.4m,2.1×2.4m,2.1 x 2.9m,etc
Round steel Tube
Panel Frame(mm)
Diameter : 32 / 38 / 40/ 42 / 48 mm
Thickness: 1.2/1.5/1.6/1.8/2.0mm
Fence Stay 1500mm, 1800mm high
Plastic Feet 580*245*130mm, 600*220*150mm ,
Fence Clamp Pitch 100 or 75
Finishing of fence hot-dipped galvanized before welding with silver protecting on the weld joints
or hot dipped galvanized after welding
Note: The fence can be customized according to your required if above specification is not satisfied with you

Temporary fence panel:
raw material (hot dipped galvanized wire)–straightening–cutting–welding to mesh
raw material(hot dipped galvanized tube)–cutting-welding to frame
mesh and frame welding together to temporary fence panel
Temporary fence surface treatment:
The welding spot wipe antirust paint, then full fence panel spray silver paint
brace also wipe antirust paint on the welded spot and then spray silver paint

1. Traffic road control, Road isolation belt, Limit vehicles
2. Concert, Outdoor activity, Sport ground
3. Highway, Public activities for crowd control
4. Temporary isolation

2.High quality galvanized 6×12 chain link temporary fence panels for America

Chain link mesh temporary fence is constructed to meet all required standards, these galvanised materials possess both long life and incredible utility. You can move them where you need them, over and over again. They even include a chain link fence infill designed to discourage climbing. Each panel stands 6ft meters high, tall enough to offer crowd control at public events and to discourage trespassing.

Temporary Chain Link Fence /Construction Fence Panels Spec

Specification of Chain Link Temporary Fence 
Fence height 4ft, 6ft, 8ft (1200mm,1800 mm, 2400 mm)
Fence width/length 8ft,10ft, 12ft, 14ft, etc (2400 mm, 3000 mm, 3700 mm, 4300 mm)
Wire diameter 2.7mm, 2.5mm, 3.0mm
Chain link mesh size 57x57mm (2-1/4″), 50x50mm, 60x60mm, etc.
Frame tube O.D 33.4mm (1-3/8″), 32.0mm, or 42mm (1-5/8″) with 0.065″ wall thickness
Vertical/cross brace tube O.D 25mm or 32.0mm with 1.6mm (0.065″) wall thickness
Fence base/stand 610x590mm, 762x460mm, etc
Accessories clamps, base feet, tension wire and tension bar (optional)
Material hot dipped galvanized
Surface treatment All joints are welded and sprayed with a galvanized paint to cover any exposed metal

High quality galvanized 6×12 chain link temporary fence panels for America
Temporary Chain Link Fence, also known as portable chain link fence or chain link construction fence, is a kind of free-standing
chain link fence with movable feet. It can be installed directly in a variety of grounds including sand, soil, asphalt and concrete without CZPT holes or removing excavated materials, which saves both time and labor. It is widely used to protect your property and prevent unauthorized persons from entering. Typically, temporary chain link fence is commonly seen in construction sites, residential sites, schools, major public events including sports, concerts, gatherings, swimming pools and traffic & crowd controls.

Temporary Chain Link Fence Panel provides a sturdy and reliable barrier
Commercial & Resident Hosing Construction Rebuild Projects Highway Projects Tree Protection Pool Protection Crash Barrier, Road Barrier, Xihu (West Lake) Dis. Rail, Portable Fencing

Packing& Loading
Panels: in order to load more quantity into container, fence panel package will be in bulk. We will load panels piece by piece. Stands/feet: steel pallet and fastened with nylon belt. Clamps: in carton. 50pcs/carton

3.Edge Protection Fence

Edge Protection Fence is structurally designed to secure construction working platforms for a variety of applications. Our Edge Protection Panels is most popualr as its beautiful Appearance and Practicability in UK, Israel Market. The common size of the panel is 1150*2600mm, There are bending on the top and bottom to make the Temporary Barrier more strong, and there is toe board on the bottom of Temporary Satey fence to prevent fine grained chippings falling down.

Edge protection fence also named edge protection Barrier,Temporary edge protection,Safety Edge Barrier,edge protection is fully used in construction under building to protect people.
Specifications for panels without bending

Wire Diameter Mesh Size Length Height Round Post Square Post

Specifications for panels with bending

Wire Diameter Mesh Size Length Height Bending Degree Round Post


Temporary Roof Edge Protection Barriers
Pontoon Mesh Edge Protection System For Floating Platforms
Fall Prevention of Edge Protection Fence
Edge Protection Fence for Walls & Shafts

4.Singapore style Yellow Powder coated temporary barrier

These Safety Metal Barricade come with prominent yellow and black colors visible from afar. These safety barricades can be used for protecting equipment, cordoning off areas, and for events. Secure, durable, and highly sturdy.
They are also interlocking which allows them to be assembled & disassembled easily and quickly. These Safety Barricades also allow easy access in providing emergency access. With a metal mesh, they provide unobstructed views. Made with top-quality workmanship, these safety metal barricades are extremely hardy and durable.
Ensure the safety of your event with peace of mind. High-quality safety metal barricades for superior protection

Specification of Singapore style Yellow Powder coated temporary barrierr
panel size 1800*1800mm, 1800*1500mm, 1800*1600mm
frame size 30mm, 32mm, 38mm, O.D.
infill mesh 4mm, 4.5mm, 5mm, 5.5mm, 6mm 
finished powder coating
feet fixed
special size is available, Welcome to customize.

1. Material:Steel tube and steel wire
2. Fence size : H*W:1.8*1.8m
3. Wire diameter:3.0-3.5mm
4. Mesh opening:50*50mm,75*75mm ect.
5. Frame pipe:25mm,32mm,42mm,48mmect.
6. Surface treament: Hot dipped galvanized/powder coated 

  Perfect for job site security, crowd control, asset protection, outdoor festivals and events.
using pallets
the pallets are very popular in packing the fence products for it will get easier to load and unload the container, the pallets also can protect the fence.

5.Portable road metal steel galvanized tube Crowd Control Barrier

Portable road metal steel galvanized tube Crowd Control Barrier (also known as pedestrian barriers and crowd control barricades) are lightweight and ideal for keeping the public safe from hazards around construction sites. The barriers are also very popular in the event industry because they act as a physical and psychological barrier and are an effective way of guiding pedestrian traffic safely by clearly marking footpaths. When Crowd Control barriers are interlocked, security personnel can create lines of barriers that are very difficult to penetrate. This is because when the crowd control barriers are interlocked, they become stronger and cannot be easily toppled over. Offset fixed legs increase the stability and strength of the barrier while making them easily stackable. The barriers are manufactured with a galvanised finish which protects against rusting and are available in high-visibility colours (orange or red) – this incurs an additional charge for the powder coating.


Specification of Portable road metal steel galvanized tube Crowd Control Barrier


Outer Frame Upright Frame Panel Size Spacing
Outer Diameter Thickness Outer Diameter Thickness Length Height (mm)
(mm) (mm) (mm) (mm) (mm) (mm)  
LCF01 38 2 16 1.5 2000 1500 60
LCF02 38 1.2 12 0.7 2015 1100 100
LCF03 25 2 20 1 2200 1100 127
LCF04 25 2 20 1 2400 1100 190
LCF05 38 1.2 16 0.7 2400 1100 200
LCF06 40 2 20 1 2400 1200  
LCF07 25 2 20 1 2500 1100  
LCF08 26 2.5 15 1.5 2500 1100  
LCF09 38 2 16 1 2500 1100  
LCF10 35 1 16 1 2500 1150  

Crowd Control Barriers are quick and easy to deploy on construction sites or events. They are designed to couple together with the next barrier using a fixed hook and loop on either side. No additional couplers are needed to join the barriers together. The versatile barriers are easy to stack, meaning they can be easily moved from site to site. Therefore, they can be banded and transported from location to location.
* Extraordinary strength and high safety.
* Light weight.
* Corrosion and rust resistance.
* Attractive various colors.
* Smooth surface.
* Easy to install and flexible to move.
* Durable and long service life.

 For use at events that need to accommodate for a larger crowd.

Packing& Loading
Portable road metal steel galvanized tube Crowd Control Barrier PACKING
1mm hole galvanized perforated metal mesh:
1. Metal Pallet
2. In Bulk

Welcome to Contact us for more details about the Metal Wire Mesh Temporary Fence.


What to look for in a roller chain

There are many different factors to consider when purchasing a roller chain. One of the most important factors is tensile strength, which represents the force required to break the chain. Roller chains are available in 3 different tensile strengths: minimum, average and ultimate. Each strength reflects a different limit to the load the chain can handle. However, these limits are not always equal and you should be aware of the differences between roller chains.

Canonical chain

Most roller chains have standard sizes printed on the side panels. This is usually “40” or “C2080H”, but can also be the letter “B”. If the chain is old, it will need to be cleaned to see its size. You can find the size on the standard roller chain size chart, but not everyone is marked. To determine the size, measure the diameter and pitch of the chain, then compare the results to the chart to see what size you need.
Heavy-duty roller chains are available with heat-treated pins, side plates, and rollers. In addition to being heat treated, they are also factory pre-stretched, which reduces wear on these parts. If properly maintained, they can last for years, reducing the risk of failure or corrosion. Depending on the application, standard roller chains are available in different sizes. It can be purchased separately. There are several options to choose from, depending on the size and strength of the application.
PEER roller chains contain solid rollers to reduce shock loads on the sprocket teeth. Heat treating and preloading all components of the PEER chain helps minimize initial elongation. Hot-dip lubrication ensures complete lubrication of all chain components, extending their life and reducing maintenance costs. For heavy-duty applications, ASME/ANSI-B29.1 chain is a good choice.
Standard roller chains are made of steel or alloy steel. However, it can be made of other materials such as stainless steel. In addition to steel, stainless steel is often used in food processing machinery where chain lubrication is an issue. Brass and nylon are also sometimes used. However, they are not that popular. Therefore, you should always check with your supplier before purchasing. By comparing the tensile strength of 2 different chains and making an informed decision, you can get the best price and service.

Chain without bushing

Bushless roller chains have advantages over conventional roller chains. Unlike conventional chains, bushless chains have extensive lateral flexibility, which increases the chain’s lubrication flow. The inner plates of bushless chains have protruding shoulders so the oil can flow through them more easily and efficiently. This is an important characteristic of a smooth-running chain. Additionally, bushless chains may have improved shifting performance.
The strength of a bushingless roller chain is measured in terms of tensile strength and fatigue strength. The former measures the load a chain can withstand before breaking. Fatigue strength is equally important, and factors that affect fatigue strength include the steel used to make the chain components, the pitch hole fabrication, the type of shot peening on the chain, and the design and thickness of the chain. For example, if the chain is too thin, it may not be enough for heavy-duty applications.
Like traditional roller chains, bushingless roller chains have 2 different types of links. The inner link has 2 inner plates connected by pins, while the outer chain has 2 outer plates held together by bushings. A bushingless roller chain is similar to a traditional chain, except it eliminates a step in the assembly process by stamping the tube into the inner plate. So if you want a smoother ride, a bushingless roller chain is a better choice.
There are 2 different sizes of bushingless roller chains. One size is designed for use with standard single-strand chains, while the other size is designed for use with double-strand or triple-strand chains. Bushless chains are generally shorter than conventional chains, so they can fit in tighter spaces. Bushless chains are made of the highest quality materials. These chain attachments are case hardened for optimum strength and durability.

Mute chain

The silent roller chain has a smooth, low-noise drive. They are made of stacked rows of flat chainplates with a gear-like profile that meshes with the sprocket teeth. Each chainplate is attached to a corresponding sprocket, which also allows the chain to bend. While these basic components are the same for every silent roller chain, there are many variations that allow them to be used in a variety of applications.
The most popular high-speed transmission, silent chains feature gear-like sprockets. They can be made from single or multiple strands of material. Single-strand chains are less expensive than multi-strand chains, but they tend to wear out faster if not lubricated. Single-strand roller chains can be used for years without lubrication, but for your application, wide silent chains are still worth considering.
The design and construction of silent chains make them ideal for conveying a wide variety of products. They have flat, heat-resistant surfaces. They are also durable and non-slip. They are available in a variety of pitch sizes, widths, and mounting styles. Whether you need chains for general purpose conveyors or glass bottle transport applications, we have you covered. Ask about the benefits of silent roller chain conveyors.
Inverted tooth chains are another option for quieter chains. These chains are designed to reduce noise from engine-related friction. Silent chains are more common, and manufacturers have fallen in love with them. A silent chain consists of several links connected to the sprocket teeth. Teeth rotate to reduce noise, vibration, and chord action. These are the main reasons why silent chains are so popular.

ANSI chain pitch

To measure your bike’s chain pitch, you can use a caliper. This measurement is taken from the center of the rolling pin to the center of the next rolling pin. Chains come in many sizes, but ANSI is the most common chain standard in the United States. A caliper is handy if you’re not sure which size to buy, as it allows you to check for worn sprockets.
Chains that meet ANSI standards will be characterized by a certain pitch. This measurement is based on the width and spacing of the roll. The spacing is usually greater than the width. The standard number will be the right number for the width of the chain or the left number for the rollers. The number on the left indicates whether the chain is lightweight or heavyweight. Heavyweight chains are designated by the suffix “H”.
Common chain sizes are based on ANSI chain pitch. Pitch is the minimum distance between bushing and sprocket. The smaller the chain pitch, the greater the total distance between the 2 points. This means the chain will last longer. However, if you are buying a chain for a specific application, you should check the pitch carefully as it can affect the performance of the chain.

Roller chain wear measurement

The purpose of roller chain wear measurement is to prevent breakage by monitoring the strain on the chain. There are several ways to measure roller chain wear. The first is to remove the chain from its working position and measure the distance from the sprocket to its measuring end. Another way is to measure the pitch of the chain or the distance between 2 pins. This method is superior to other methods because it is convenient and accurate.
When measuring the wear of a roller chain, it is important to note that the elements of the chain will gradually deform. About 3.75% of the total wear will be on the pins and the rest will be on the internal links. These wear measurements will vary based on the nominal pitch of the chain and the amount of friction the chain is experiencing. Proper lubrication between pins and bushings, load and frequency of articulation all affect wear rates.
It is important to measure the amount of wear on the roller chain to avoid excessive machine failures. The longer the chain runs, the more wear it will wear. Although the length of the chain should be less than the center distance, the excessive load will cause premature wear. Therefore, lubrication is essential. Additionally, the sag of the chain should not exceed 2% to 4% of its center-to-center distance. Finally, check for unusual noise or visible defects. A common cause of excessive roller chain wear is the size of the load. Every chain manufacturer sets a maximum workload for its product.
There are several ways to measure roller chain wear. If using a high-speed drive, it should have at least 11 teeth, and a medium-speed drive should have at least 25 teeth. Also, be sure to check the length of the chain, even if you should. The same goes for the pin diameter, which should be the same or different pitch as the roller chain.

China high quality USA Standard Galvanized Chain Link Temporary Fence for Construction/Factory Supply High Quality 4mm Wire Powder Coated Outdoor Temporary Chain Link Fence     near me factory China high quality USA Standard Galvanized Chain Link Temporary Fence for Construction/Factory Supply High Quality 4mm Wire Powder Coated Outdoor Temporary Chain Link Fence     near me factory