Product Description

1.Galvanized Road Safety Construction Protection Portable Temporary Fencing Panels/Temporary Fence Panel for Australia and New Zealand

Temporary fence is made of welded wire mesh panel and square pipes. And there is a square pipe in the middle of welded wire mesh panel to support it and make it more strength. And it can be PVC coated, powder coated, galvanized or painted. Its permanent counterpart when a fence is required on a short-term of temporary fence panels to suit your site specific requirements. Our fence panels are designed and constructed to be the strongest and most durable in the industry. They can be installed quickly and easily, They can be free standing or anchored into any type of surface.

Galvanized Road Safety Construction Protection Portable Temporary Fencing Panels Spec
Specification of Temporary Fence

Wire Diameter 2.5mm, 3.0mm, 3.5mm, 3.8mm,4.0mm,5.0mm
Mesh Opening (mm) 50x100mm,50x150mm,75x100mm,75x150mm,etc
Panel Size (H*L) 1.8×2.1m,1.8×2.4m,2.1×2.4m,2.1 x 2.9m,etc
Round steel Tube
Panel Frame(mm)
Diameter : 32 / 38 / 40/ 42 / 48 mm
Thickness: 1.2/1.5/1.6/1.8/2.0mm
Fence Stay 1500mm, 1800mm high
Plastic Feet 580*245*130mm, 600*220*150mm ,
Fence Clamp Pitch 100 or 75
Finishing of fence hot-dipped galvanized before welding with silver protecting on the weld joints
or hot dipped galvanized after welding
Note: The fence can be customized according to your required if above specification is not satisfied with you

Temporary fence panel:
raw material (hot dipped galvanized wire)–straightening–cutting–welding to mesh
raw material(hot dipped galvanized tube)–cutting-welding to frame
mesh and frame welding together to temporary fence panel
Temporary fence surface treatment:
The welding spot wipe antirust paint, then full fence panel spray silver paint
brace also wipe antirust paint on the welded spot and then spray silver paint

1. Traffic road control, Road isolation belt, Limit vehicles
2. Concert, Outdoor activity, Sport ground
3. Highway, Public activities for crowd control
4. Temporary isolation

2.High quality galvanized 6×12 chain link temporary fence panels for America

Chain link mesh temporary fence is constructed to meet all required standards, these galvanised materials possess both long life and incredible utility. You can move them where you need them, over and over again. They even include a chain link fence infill designed to discourage climbing. Each panel stands 6ft meters high, tall enough to offer crowd control at public events and to discourage trespassing.

Temporary Chain Link Fence /Construction Fence Panels Spec

Specification of Chain Link Temporary Fence 
Fence height 4ft, 6ft, 8ft (1200mm,1800 mm, 2400 mm)
Fence width/length 8ft,10ft, 12ft, 14ft, etc (2400 mm, 3000 mm, 3700 mm, 4300 mm)
Wire diameter 2.7mm, 2.5mm, 3.0mm
Chain link mesh size 57x57mm (2-1/4″), 50x50mm, 60x60mm, etc.
Frame tube O.D 33.4mm (1-3/8″), 32.0mm, or 42mm (1-5/8″) with 0.065″ wall thickness
Vertical/cross brace tube O.D 25mm or 32.0mm with 1.6mm (0.065″) wall thickness
Fence base/stand 610x590mm, 762x460mm, etc
Accessories clamps, base feet, tension wire and tension bar (optional)
Material hot dipped galvanized
Surface treatment All joints are welded and sprayed with a galvanized paint to cover any exposed metal

High quality galvanized 6×12 chain link temporary fence panels for America
Temporary Chain Link Fence, also known as portable chain link fence or chain link construction fence, is a kind of free-standing
chain link fence with movable feet. It can be installed directly in a variety of grounds including sand, soil, asphalt and concrete without CZPT holes or removing excavated materials, which saves both time and labor. It is widely used to protect your property and prevent unauthorized persons from entering. Typically, temporary chain link fence is commonly seen in construction sites, residential sites, schools, major public events including sports, concerts, gatherings, swimming pools and traffic & crowd controls.

Temporary Chain Link Fence Panel provides a sturdy and reliable barrier
Commercial & Resident Hosing Construction Rebuild Projects Highway Projects Tree Protection Pool Protection Crash Barrier, Road Barrier, Xihu (West Lake) Dis. Rail, Portable Fencing

Packing& Loading
Panels: in order to load more quantity into container, fence panel package will be in bulk. We will load panels piece by piece. Stands/feet: steel pallet and fastened with nylon belt. Clamps: in carton. 50pcs/carton

3.Edge Protection Fence

Edge Protection Fence is structurally designed to secure construction working platforms for a variety of applications. Our Edge Protection Panels is most popualr as its beautiful Appearance and Practicability in UK, Israel Market. The common size of the panel is 1150*2600mm, There are bending on the top and bottom to make the Temporary Barrier more strong, and there is toe board on the bottom of Temporary Satey fence to prevent fine grained chippings falling down.

Edge protection fence also named edge protection Barrier,Temporary edge protection,Safety Edge Barrier,edge protection is fully used in construction under building to protect people.
Specifications for panels without bending

Wire Diameter Mesh Size Length Height Round Post Square Post

Specifications for panels with bending

Wire Diameter Mesh Size Length Height Bending Degree Round Post


Temporary Roof Edge Protection Barriers
Pontoon Mesh Edge Protection System For Floating Platforms
Fall Prevention of Edge Protection Fence
Edge Protection Fence for Walls & Shafts

4.Singapore style Yellow Powder coated temporary barrier

These Safety Metal Barricade come with prominent yellow and black colors visible from afar. These safety barricades can be used for protecting equipment, cordoning off areas, and for events. Secure, durable, and highly sturdy.
They are also interlocking which allows them to be assembled & disassembled easily and quickly. These Safety Barricades also allow easy access in providing emergency access. With a metal mesh, they provide unobstructed views. Made with top-quality workmanship, these safety metal barricades are extremely hardy and durable.
Ensure the safety of your event with peace of mind. High-quality safety metal barricades for superior protection

Specification of Singapore style Yellow Powder coated temporary barrierr
panel size 1800*1800mm, 1800*1500mm, 1800*1600mm
frame size 30mm, 32mm, 38mm, O.D.
infill mesh 4mm, 4.5mm, 5mm, 5.5mm, 6mm 
finished powder coating
feet fixed
special size is available, Welcome to customize.

1. Material:Steel tube and steel wire
2. Fence size : H*W:1.8*1.8m
3. Wire diameter:3.0-3.5mm
4. Mesh opening:50*50mm,75*75mm ect.
5. Frame pipe:25mm,32mm,42mm,48mmect.
6. Surface treament: Hot dipped galvanized/powder coated 

  Perfect for job site security, crowd control, asset protection, outdoor festivals and events.
using pallets
the pallets are very popular in packing the fence products for it will get easier to load and unload the container, the pallets also can protect the fence.

5.Portable road metal steel galvanized tube Crowd Control Barrier

Portable road metal steel galvanized tube Crowd Control Barrier (also known as pedestrian barriers and crowd control barricades) are lightweight and ideal for keeping the public safe from hazards around construction sites. The barriers are also very popular in the event industry because they act as a physical and psychological barrier and are an effective way of guiding pedestrian traffic safely by clearly marking footpaths. When Crowd Control barriers are interlocked, security personnel can create lines of barriers that are very difficult to penetrate. This is because when the crowd control barriers are interlocked, they become stronger and cannot be easily toppled over. Offset fixed legs increase the stability and strength of the barrier while making them easily stackable. The barriers are manufactured with a galvanised finish which protects against rusting and are available in high-visibility colours (orange or red) – this incurs an additional charge for the powder coating.


Specification of Portable road metal steel galvanized tube Crowd Control Barrier


Outer Frame Upright Frame Panel Size Spacing
Outer Diameter Thickness Outer Diameter Thickness Length Height (mm)
(mm) (mm) (mm) (mm) (mm) (mm)  
LCF01 38 2 16 1.5 2000 1500 60
LCF02 38 1.2 12 0.7 2015 1100 100
LCF03 25 2 20 1 2200 1100 127
LCF04 25 2 20 1 2400 1100 190
LCF05 38 1.2 16 0.7 2400 1100 200
LCF06 40 2 20 1 2400 1200  
LCF07 25 2 20 1 2500 1100  
LCF08 26 2.5 15 1.5 2500 1100  
LCF09 38 2 16 1 2500 1100  
LCF10 35 1 16 1 2500 1150  

Crowd Control Barriers are quick and easy to deploy on construction sites or events. They are designed to couple together with the next barrier using a fixed hook and loop on either side. No additional couplers are needed to join the barriers together. The versatile barriers are easy to stack, meaning they can be easily moved from site to site. Therefore, they can be banded and transported from location to location.
* Extraordinary strength and high safety.
* Light weight.
* Corrosion and rust resistance.
* Attractive various colors.
* Smooth surface.
* Easy to install and flexible to move.
* Durable and long service life.

 For use at events that need to accommodate for a larger crowd.

Packing& Loading
Portable road metal steel galvanized tube Crowd Control Barrier PACKING
1mm hole galvanized perforated metal mesh:
1. Metal Pallet
2. In Bulk

Welcome to Contact us for more details about the Metal Wire Mesh Temporary Fence.


buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed 2 to 4 percent of the center distance (the distance between the 2 axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked 1 on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in 2 types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in 3 dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has 2 or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these 2 plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Standard Construction Station Mobile Site Hire Fence Rent Panel Temporary Fence Chain Link Filled Stands Feet Bottom Base Clips/Portable Galvanized American Chain Link     near me supplier China Standard Construction Station Mobile Site Hire Fence Rent Panel Temporary Fence Chain Link Filled Stands Feet Bottom Base Clips/Portable Galvanized American Chain Link     near me supplier