Product Description

                                                                         Stud Link Anchor Chain
                                                                —U2/U3/R3/R3S/R4 grade available—

Stud Link Anchor Chain is widely used on ships, Oil Rigs and Mooring System.
Our factory has been approved by ABS, DNV, LR, BV, NK, KR and CCS classification society, and can produce high quality marine and offshore chain from common U2 and U3 grade chain to R3 R3S, R4 offshore chain and fittings.

Test Load of Stud Link Anchor Chain and Fittings

Diameter (mm) Proof Test Load (kN) Breaking Test Load (kN) Weight (kg/27.5m)
Grade 2 Grade 3 Grade 2 Grade 3
17.5 127 179 179 256 194.0
19 150 211 211 301 236.0
20.5 175 244 244 349 269.0
22 200 280 280 401 322.0
24 237 332 332 476 370.0
26 278 389 389 556 431.0
28 321 449 449 642 496.0
30 368 514 514 735 564.0
32 417 583 583 833 635.0
34 468 655 655 937 712.0
36 523 732 732 1050 800.0
38 581 812 812 1160 887.0
40 640 896 896 1280 1032.0
42 703 981 981 1400 1084.0
44 769 1080 1080 1540 1197.0
46 837 1170 1170 1680 1310.0
48 908 1270 1270 1810 1438.0
50 981 1370 1370 1960 1546.0
52 1060 1480 1480 2110 1661.0
54 1140 1590 1590 2270 1791.0
56 1220 1710 1710 2430 1926.0
58 1290 1810 1810 2600 2086.0
60 1380 1940 1940 2770 2249.0
62 1470 2060 2060 2940 2361.0
64 1560 2190 2190 3130 2516.0
66 1660 2310 2312 3300 2676.0
68 1750 2450 2450 3500 2885.0
70 1840 2580 2580 3690 3571.0
73 1990 2790 2790 3990 3274.0
76 2150 3571 3571 4300 3548.0
78 2260 3160 3160 4500 3737.0
81 2410 3380 3380 4820 4030.0
84 2580 3610 3610 5160 4334.0
87 2750 3850 3850 5500 4650.0
90 2920 4090 4090 5840 4976.0
92 3040 4260 4260 6080 5119.0
95 3230 4510 4510 6440 5544.0
97 3340 4680 4680 6690 5780.0
100 3530 4940 4940 7060 6143.0
102 3660 5120 5120 7320 6398.0
105 3850 5390 5390 7700 6773.0
107 3980 5570 5570 7960 7033.0
111 4250 5940 5940 8480 7569.0
114 4440 6230 6230 8890 7983.0
117 4650 6510 6510 9300 8409.0
120 4850 6810 6810 9720 8863.0
122 5000 7000 7000 9990 9143.0
124 5140 7200 7200 15710 9598.0
127 5350 7490 7490 1571 9908.0


What is a drive chain?

A drive chain is a wheeled device that transmits power from 1 gear to another. The drive chain is usually an oval ring around a corner or worm gear. On the other hand, idler pulleys do not transmit power and are not used to move the chain. In some cases, drive chains can be used with idler pulleys to transport objects. This allows the drive chain to recover some power from the second gear.

conveyor chain

There are many types of conveyor chains to choose from. One type is a closed joint chain. It consists of the barrel and connecting rod, made from a single casting and heat-treated for high strength and durability. Conveyor chains typically have low running speeds and are typically made of malleable iron. Another type of chain is the power transmission chain, which is used to transmit mechanical power. They feature efficient lubrication and are stronger than conventional conveyor chains.
Roller chain pitches can range from half an inch to a third of an inch. They are available in steel and nickel-plated steel. They can be used with inline or staggered rollers and can be designed with different pitch levels. They can also have bushings between the chainplates or gaps between the teeth to increase their maximum spacing. When choosing a conveyor chain, remember to properly lubricate bearing surfaces to minimize power absorption, wear, and corrosion. Mineral oils of medium viscosity are suitable for normal operating temperatures. SAE 20W50 is suitable. Manufacturers also offer self-lubricating chains.
Conveyor chains are used in many industries. The automotive industry has traditionally used these chains for bulk transport. Their reliability and low cost make them an excellent choice for a variety of applications. CZPT Chains offers stainless steel and CZPT conveyor chains to meet your unique requirements. If you’re in the market for a new conveyor, don’t forget to shop around. CZPT Chain can help you find the perfect one.
The regular drive version consists of an ASME/ANSI roller chain wrapped around a driven sprocket. It can also be configured for variable rpm. The gear ratio between the 2 parts determines the reduction or increase in speed. In some cases, solution chains can be used. Roller chains are more efficient. Then, there are solutions for both cases. There are many types of conveyor chains to choose from.
Conveyor chain pitch also plays an important role in performance. The smaller the pitch of the chain, the faster it spins. On the other hand, a smaller pitch will require more teeth on the sprocket, which means more links will be engaged during the movement. This smaller articulation angle also produces smoother motion. It also reduces vibration. Therefore, CZPT Chains can be trusted for a long time.

roller chain

The performance of a drive chain depends on how well it is maintained and lubricated. Careful attention to detail is required when selecting a roller chain, which is 1 of the most important components in a drive chain. Its proper lubrication and assembly will significantly affect its wear life. Here are some important tips to follow when buying a roller chain:
The size of the drive chain should be selected according to the sprockets used. The large sprocket should have at least 25 teeth, and the small sprocket should have fewer teeth. The pitch of a drive chain is the contact angle between the chain and the sprocket. The smaller the sprocket, the smaller the contact angle of the 2 parts. Larger sprockets are better, but smaller sprockets must never have fewer teeth.
When purchasing a roller chain, be sure to consider the maximum speed of the small sprocket. This will determine how much lubrication you need. Different lubrication systems have different requirements. Manual lubrication limits how many feet per minute the drive chain can run, while oil bath lubrication can get you up to 1100 ft/min. The only way to maximize drive chain speed is to purchase a pump lubrication system.
Once you have the right length, you can determine if you need a new one. To do this you have to move the axis to measure the length. Once the length is determined, the drive chain should be removed from the sprocket and measured using the ANSI specified measuring load. You should also follow safety guidelines when measuring your chain. If you want to maximize the life of your drive chain, be sure to follow these tips.
Another important consideration is the type of environment you operate in. For applications that need to avoid rubbing steel rails, it is best to use a roller chain that can withstand a clean indoor environment. Although roller chains are generally more durable, they must be stored properly to avoid corrosion. If you care about the environment, consider opting for double chain. Its durability and low maintenance costs will make it a valuable investment in your business.

closed pivot

Closed-end pivot drive chains are used in a variety of applications. They are known for their durability, high strength, and long life. They are available in a variety of grades, including grade 400, grade 600, and grade 800 pivots, which can withstand the high forces required for certain applications. Enclosed pivot chains can be used to lift, pull, convey and transfer heavy loads.
Class 400 closed-end pivot chain features one-piece cast offset link construction. Steel pins connect each link and are prevented from rotating by head stops. This design allows the pin to connect inside the barrel without breaking. This type of chain is the most commonly used and has the highest durability. In addition to being extremely durable, it offers long-lasting performance and smooth operation.
Another closed-end pivot conveyor chain drive is called a power drive chain. These chains consist of barrels and links used to transmit rotation from 1 shaft to another. The barrels of the closed-end pivot chains are made of steel, which allows them to run easily on the sprockets. Block drive chains are used for low-speed applications, but they can be noisy when the chain is in contact with the sprockets.
The enclosed pivot drive chain has rollers on both ends to minimize wear. These chains are usually made of steel and can be used in areas where high-speed power transmission is required. They are also available in heavy-duty versions. Unlike other types of chains, steel pivot chains are designed for a variety of applications. They are suitable for heavy-duty applications and their open barrel design allows for minimal contact with the pins in the barrel and the root of the sprocket.

Linear chain

CZPT is an important part of linear drive technology. This type of chain is capable of delivering real power in tight spaces. Typically, loads are moved by pulling or pushing. CZPT can perform both types of movements. They can push and pull additional loads. This type of chain can also be wound and stored in the magazine. It is a popular choice for small machine tools and many other uses.
Unlike traditional mechanical chains, CZPT uses a push-pull strategy to move heavy objects. It is a rigid locking design that prevents kinking and allows the chain to transmit force without bending. The CZPT is an excellent choice for moving large loads and is particularly versatile in power transmission. However, CZPT is more expensive than traditional drive chain options.
The service life of a linear chain depends on its design, material type and size. You may want to buy a good quality chain, but it’s not necessary in all cases. While superior quality can extend the life of the chain, it may not be necessary for low-speed drives or very light shock loads. If you’re not dealing with high-velocity shock loads, you probably don’t need features like oil reservoirs or bushing grooves.
The size of the drive sprocket can have a major impact on the overall life of the linear chain. It determines how fast the chain can go and how much horsepower it can produce. An 11-tooth chain will hit about half its rated speed, but only about 30 percent of its rated horsepower. You can extend the life of your linear chain by choosing a drive sprocket with a higher number of teeth. It is best to choose a drive sprocket with a high number of teeth, but make sure the number of teeth is even. This will ensure that your chain wear is evenly distributed.

China wholesaler Heavy Anchor Chain in a Flexible CZPT Mooring System     with Free Design CustomChina wholesaler Heavy Anchor Chain in a Flexible CZPT Mooring System     with Free Design Custom